BMW K 1200 Rsport Rider'S Manual Download Page 53

Page: 53 / 162

Heating off.

50 % heat output (one
dot visible).

100 % heat output (three
dots visible)

Clutch

Adjusting the clutch
lever

If the position of the
clutch fluid reservoir is

changed, air can enter the
clutch system.
Do not twist the handlebar
fitting or the handlebars.

Attempting to adjust the
clutch lever while riding

the motorcycle can lead to
accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.

Turn adjusting screw

clockwise.

The adjusting screw is
indexed and is easier

to turn if you push the clutch
lever forward.

Span between handlebar
grip and clutch lever in-
creases.

Turn adjusting screw

counter-clockwise.
Span between handlebar
grip and clutch lever de-
creases.

Brakes

Adjusting the handbrake
lever

Changing the position of
the brake-fluid reservoir

can allow air to penetrate the
brake system.
Do not twist the handlebar
fitting or the handlebars.

Attempting to adjust the
brake lever while riding

the motorcycle can lead to
accidents.
Do not attempt to adjust the
brake lever unless the motor-
cycle is at a standstill.

Operation

Summary of Contents for K 1200 Rsport



































































































































































Search results

Summary of Contents for K 1200 Rsport

Reviews:

Brands by name

Popular brands

BMW K 1200 Rsport, Rider'S Manual

Search results

Summary of Contents for K 1200 Rsport

Reviews:

Brands by name

Popular brands