BMW K 1200 Rsport Rider'S Manual Download

Page: 98 / 162

Clutch

Checking clutch
operation

Pull the clutch lever.
The pressure point must be
clearly perceptible.

If the pressure point is not
clearly perceptible:

Have the clutch checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.

Check the clutch fluid
level

Make sure the ground is
level and firm and hold the
motorcycle upright.
Move the handlebars to the
straight-ahead position.

with OA Centre stand:

Make sure the ground is
level and firm and place

the motorcycle on its centre
stand.
Move the handlebars to the
straight-ahead position.

Check the clutch fluid level
in clutch fluid reservoir

Wear of the clutch
causes the fluid level in

the clutch fluid reservoir to
rise.

Clutch fluid level

Do not permit the clutch
fluid level to drop.

If the fluid level drops:

Unsuitable hydraulic flu-
ids could cause damage

to the clutch system.
Do not attempt to top up
the system with fluids of any
kind.

Have the defect rectified
as quickly as possible by a
specialist workshop, prefer-

Maintenance

Summary of Contents for K 1200 Rsport



































































































































































Search results

Summary of Contents for K 1200 Rsport

Reviews:

Related manuals for K 1200 Rsport

Brands by name

Popular brands

BMW K 1200 Rsport, Rider'S Manual

Search results

Summary of Contents for K 1200 Rsport

Reviews:

Related manuals for K 1200 Rsport

Brands by name

Popular brands