BMW G 650 Xmoto Manual Download Page 77

Page: 77 / 133

Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake caliper.

Once the calipers have
been removed, there is

a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.

Carefully pull the brake caliper
back and out until clear of the
brake disc.

with OE BMW Motorrad ABS:

When removing the left brake
caliper, take care not to dam-
age the ABS sensor cable.

Place the motorcycle on a suit-
able auxiliary stand. BMW Mo-

torrad recommends the BMW
Motorrad auxiliary stand.
Install the auxiliary stand
(

77)

with OE BMW Motorrad ABS:

Remove screw

of the ABS

sensor and remove the ABS
sensor from the holder.

Use a suitable auxiliary stand to
lift the front wheel. BMW Mo-
torrad recommends the BMW
Motorrad front wheel stand.
Install the front wheel stand
(

79)

Slacken left axle clamping
screws

Remove axle screw

Slacken right axle clamping
screws

Working from the left, push
axle

in until it projects from

Maintenance

Summary of Contents for G 650 Xmoto






































































































































Search results

Summary of Contents for G 650 Xmoto

Reviews:

Related manuals for G 650 Xmoto

Brands by name

Popular brands

BMW G 650 Xmoto, Manual

Search results

Summary of Contents for G 650 Xmoto

Reviews:

Related manuals for G 650 Xmoto

Brands by name

Popular brands