48
Seat and mirror memory*
You can memorise and call up three dif-
ferent driver's-seat and outside-mirror
position settings.
The setting for the lumbar support
is not stored in memory.
<
Memorising
1. Ignition key in position 1 or 2
2. Select a seat and outside-mirror
position
3. Press the MEMORY button: the tell-
tale light in the switch comes on
4. Press memory button 1, 2 or 3: the
telltale light goes out.
Calling up
Do not call up a memorised set-
ting while driving, as an unex-
pected seat movement could represent
an accident risk.
<
Ignition key position 1:
>
Press the appropriate memory button
1, 2 or 3 briefly.
The adjusting movement is inter-
rupted immediately if a seat position
adjustment switch or one of the
memory buttons is pressed.
With the driver's door closed and the
ignition key either removed or in posi-
tion 0 or 2:
>
Press memory button 1, 2 or 3 until
the adjusting procedure has been
completed.
If the MEMORY button was
pressed accidentally: press the
button a second time; the telltale light
will go out.
<
You can have your car pro-
grammed to ensure that your pre-
ferred seat and outside-mirror positions
are selected whenever you unlock the
car with your own personal remote con-
trol key.
<
When this setting is used, make
sure that the footwell behind the
driver's seat is clear. Otherwise dam-
age or injury could be caused by the
seat if it moves backwards.
<
handbook.book Page 48 Thursday, December 19, 2002 4:29 PM
All manuals and user guides at all-guides.com
