124
Washer fluid
Headlight* and windscreen
washer system
Capacity approx. 5.3 litres (9.3 Imp.
pints).
Fill with water and when required
with a suitable additive according to
manufacturer's instructions.
It is best to mix the water and
additive before filling the washer
fluid tank.
<
Screenwash used in washer fluid
is flammable. Keep it away from
possible ignition sources and store it
only in the carefully sealed original
packs, inaccessible to children. Comply
with the instructions on the container.
<
Engine oil
Checking engine oil level
1. Make sure the car is standing level
2. Switch off the engine, which should
be at its regular operating tempera-
ture
3. After about 5 minutes, pull out the
dipstick and wipe it clean with a lint-
free cloth, a paper tissue or similar
4. Carefully push the dipstick fully into
its tube, then pull it out again
5. The oil level must be between the
two marks on the dipstick.
Like fuel consumption, engine oil con-
sumption depends on driving style and
operating conditions.
The gap between the two notches on
the dipstick is equivalent to about 1 litre
(1.8 Imp. pints) of oil. Do not fill beyond
the upper mark on the dipstick. Adding
too much oil will harm the engine.
handbook.book Page 124 Thursday, December 19, 2002 4:29 PM
All manuals and user guides at all-guides.com
all-guides.com
