BMW 2015 M6 Coupe Owner'S Manual Download Page 137

Page: 137 / 226

▷

For persons with certain clothing, e.g.
coats.

▷

With external interference of the ultra‐
sound, e.g. from passing vehicles or loud
machines.

▷

When sensors are dirty, iced over, dam‐
aged or out of position.

▷

Under certain weather conditions such as
high relative humidity, rain, snowfall, ex‐
treme heat or strong wind.

▷

With tow bars and trailer couplings of other
vehicles.

▷

With thin or wedge-shaped objects.

▷

With moving objects.

▷

With elevated, protruding objects such as
ledges or cargo.

▷

With objects with corners and sharp edges.

▷

With objects with a fine surface structure
such as fences.

▷

For objects with porous surfaces.

Low objects already displayed, e.g., curbs, can
move into the blind area of the sensors before
or after a continuous tone sounds.

False warnings

PDC may issue a warning under the following
conditions even though there is no obstacle
within the detection range:

▷

In heavy rain.

▷

When sensors are very dirty or covered
with ice.

▷

When sensors are covered in snow.

▷

On rough road surfaces.

▷

On uneven surfaces, such as speed
bumps.

▷

In large buildings with right angles and
smooth walls, e.g., in underground ga‐
rages.

▷

In automatic car washes.

▷

Through heavy pollution.

▷

Due to other ultrasound sources, e.g.,
sweeping machines, high pressure steam
cleaners or neon lights.

Malfunction

A Check Control message is displayed.
The range of the sensors is shown as a shaded
area on the Control Display.
PDC has failed. Have the system checked.
To ensure full functionality:

▷

Keep the sensors clean and free of ice.

▷

dimmedDo not put any stickers on sen‐
sors.

▷

When using high-pressure washers, do not
spray the sensors for long periods and
maintain a distance of at least 12 in/30 cm.

Surround View

The concept

Surround View comprises various camera as‐
sistance systems that help the driver when
parking, maneuvering, and at complex exits
and intersections.

▷

Rearview camera, refer to page

133

▷

Side View, refer to page

136

▷

Top View, refer to page

137

Rearview camera

The concept

The rearview camera provides assistance in
parking and maneuvering backwards. The area
behind the vehicle is shown on the Control
Display.

Seite 133

Driving comfort

Controls

133

Online Edition for Part no. 01 40 2 954 258 - II/15

Summary of Contents for 2015 M6 Coupe



































































































































































































































Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands

BMW 2015 M6 Coupe, Owner'S Manual

Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands