BMW 2015 M6 Coupe Owner'S Manual Download Page 32

Page: 32 / 226

This can unnecessarily delay the establish‐
ment of a phone connection.
Instead, use the SOS button, refer to
page

198

, close to the interior mirror.

Environmental conditions

▷

Say the commands, numbers, and letters
smoothly and with normal volume, empha‐
sis, and speed.

▷

Always say commands in the language of
the voice activation system.

▷

Keep the doors, windows, and glass sun‐
roof closed to prevent noise interference.

▷

Avoid making other noise in the vehicle
while speaking.

Seite 28

At a glance

Voice activation system

Online Edition for Part no. 01 40 2 954 258 - II/15

Summary of Contents for 2015 M6 Coupe



































































































































































































































Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands

BMW 2015 M6 Coupe, Owner'S Manual

Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands