BMW 2015 M6 Coupe Owner'S Manual Download Page 160

Page: 160 / 226

Folding down

Pull on the opener and fold the armrest for‐
ward.

Opening

Pull on the handle and fold open the cover.

Clothes hooks

Do not obstruct view
When suspending clothing from the

hooks, ensure that it will not obstruct the driv‐
er's view.◀

No heavy objects
Do not hang heavy objects from the

hooks; otherwise, they may present a danger
to passengers during braking and evasive ma‐
neuvers.◀

Two folding clothes hooks are provided in the
rear of the vehicle. To unfold them, press on
the top edge of the clothes hooks.

Cupholders

Hints

Shatter-proof containers and no hot
drinks

Use light and shatter-proof containers and do
not transport hot drinks. Otherwise, there is
the increased danger of injury in an accident.◀

Unsuitable containers
Do not forcefully push unsuitable con‐

tainers into the cupholders. This may result in
damage.◀

Center console

To open: press on the cover.

In the rear

In the center armrest.

The cupholder can be adjusted for three differ‐
ent container sizes.
To open: press the button.
To reduce in size: fold closed to the desired
position.

Seite 156

Controls

Storage compartments

156

Online Edition for Part no. 01 40 2 954 258 - II/15

Summary of Contents for 2015 M6 Coupe



































































































































































































































Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands

BMW 2015 M6 Coupe, Owner'S Manual

Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands