BMW 2015 M6 Coupe Owner'S Manual Download Page 62

Page: 62 / 226

Activating

Slide the switch to the driver's side

mirror position.

Engage selector lever position R.

Deactivating

Slide the switch to the passenger side mirror
position.

Fold in and out

Press button.

Possible at speeds up to approx.
15 mph/20 km/h.
E. g. this is advantageous

▷

In car washes.

▷

In narrow streets.

▷

For folding mirrors back out that were
folded away manually.

Mirrors that were folded in are folded out auto‐
matically at a speed of approx.
25 mph/40 km/h.

Fold in the mirror in a car wash
Before washing the car in an automatic

car wash, fold in the exterior mirrors by hand or
with the button; otherwise, the mirrors could
be damaged, depending on the width of the
vehicle.◀

Automatic heating

Both exterior mirrors are automatically heated
whenever the engine is running.

Automatic dimming feature

Both exterior mirrors are automatically dim‐
med. Photocells are used to control the Interior
rearview mirror, refer to page

Interior rearview mirror, automatic

dimming feature

The concept

Photocells are used for control:

▷

In the mirror glass.

▷

On the back of the mirror.

Functional requirement

For proper operation:

▷

Keep the photocells clean.

▷

Do not cover the area between the inside
rearview mirror and the windshield.

Steering wheel

Note

Do not adjust while driving
Do not adjust the steering wheel while

driving; otherwise, an unexpected movement
could result in an accident.◀

Seite 58

Controls

Adjusting

Online Edition for Part no. 01 40 2 954 258 - II/15

Summary of Contents for 2015 M6 Coupe



































































































































































































































Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands

BMW 2015 M6 Coupe, Owner'S Manual

Search results

Summary of Contents for 2015 M6 Coupe

Reviews:

Related manuals for 2015 M6 Coupe

Brands by name

Popular brands