BMW Motorrad R 1250RT, Rider'S Manual

Page: 81 / 379

75
DYNAMIC TRACTION CON-
TROL (DTC)
Switching DTC function off
and on
Switch on the ignition ( 62).
Navigate to
Settings
,
As-
sist
and select
DTC
.
Deactivate
DTC
to switch
off Dynamic Traction Con-
trol (DTC) temporarily until
the next time the ignition is
switched on.
lights up.
Activate
DTC
to switch
on Dynamic Traction
Control (DTC). Alternatively:
Switch the ignition off and
then on again.
goes out, if self-diagnosis
has not completed the
DTC indicator and warning
light starts flashing.
For more information on
Dynamic Traction Control
(DTC), see the section
entitled "Engineering details"
( 182).
ELECTRONIC SUSPENSION
ADJUSTMENT (D­ESA)
with Dynamic ESA
OE
Possibilities for adjustment,
Dynamic ESA
Dynamic ESA is an electronic
system that enables your mo-
torcycle's suspension to adjust
automatically to suit the load
the vehicle is carrying.
For more information on
Dynamic ESA, see the section
entitled "Engineering details"
( 186).
Adjusting suspension damping
Switch on the ignition ( 62).
Navigate to
Settings
,
As-
sist
and select
Damping
.
Select the desired suspension-
damping setting.
You can adjust the damp-
ing characteristic while
the motorcycle is on the move.
The suspension damping
settings are retained in
memory, even after the ignition
is switched off.
Adjusting for loaded state
Start the engine ( 159).
Navigate to
Settings
,
As-
sist
and select
Load
.
Select the desired loaded-
state setting.