BMW Motorrad R 1250RT, Rider'S Manual

Page: 219 / 379

213
The sensor rings are essential
for correct road-speed calcula-
tion, and they too must match
the motorcycle's control sys-
tems and consequently cannot
be changed.
If you decide that you would
like to fit non-standard
wheels to your motorcycle,
it is very important to con-
sult a specialist workshop
beforehand, preferably an
authorised BMW Motorrad
retailer. In some cases, the
data programmed into the
control units can be changed to
suit the new wheel sizes.
Removing front wheel
Remove screws 1 on left and
right.
Disengage front-wheel
cover 1 at hooks 2 and
remove.
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Disengage the cable for the
wheel speed sensor from
holding clips 1 and 2 .
Remove screw 3 and remove
the wheel speed sensor from
its bore.
Remove mounting bolts 4 of
the left and right brake cal-
ipers.