BMR SFU-0303 Series, Manual

Page: 23 / 48

SFU-0303 M a n u a l
E
- 23 -
Start and Stop
In the simplest case, a connected and appropriately set up spindle can be started by pressing the
Start-Button. The desired speed can be adjusted by dialing with the rotary encoder either as
preset value during standstill or in Run mode. The preconditions for a correct Start can be looked
up under 7 and 7.1 .
Any error or malfunction is displayed as plain text
All relevant system messages on rotational speed, load or problems are displayed on the LCD
display
The current power output is displayed in the lower part as analogue load bar as % and absolute.
An overload condition will be displayed as well.
The pre selected and current speed, the selected characteristic are displayed
Attention:
The operation of a spindle with an incorrect spindle characteristic may harm the
spindle severely!
Please ensure that the correct characteristic is selected
If several spindles are operated simultaneously, it has to be ensured that they are of
the same type and that a specific characteristic is selected.
Otherwise this may harm one or more spindles or the converter severely!