BlueVary UPDATING MANUAL
Rev 200504 002
9
EN
Selecting Admin user
4.3
In the submenu
Set user level
the access rights can be chosen according to the following list:
user level
Access rights
Code
Normal user
Reading rights
Unnecessary
Calibration user
Normal user + calibration rights (1-point / 2-point)
0001
Installation user
Normal user + configuration rights
2020
Admin
Unlimited rights
1818
After a reset or power up user level always switches to
Normal User
!
To prepare the
BlueVary
for the firmware update the
Admin
has to be selected. Place the cursor with
the
buttons in front of the
Admin
. By pressing
OK
button the user is selected. Now proceed with
code input. Select the
Code
line (
+
OK
) and insert the code
1818
(
+
ESC
).
To accept the input go to
Apply settings
(
) and press
OK
.
Depending on whether the code was right or not one of the following messages appear:
The message has to be confirmed by pressing
OK
.
Fig. 8: Schematic of the submenu user level
Fig. 9: Possible messages after trying to apply settings in the User menu
