BlueVary UPDATING MANUAL
Rev 200504 002
5
EN
3 Installation
General instructions
3.1
The
BlueVary
was protected on its way to the
installation location by a special packaging (Keep this
package for maintenance purposes). This secures it
against the usual transport strains. However, before
installation, check if the device has suffered
damaged due to improper transport or incorrect
storage. If the device is damaged in any way,
operation without hazards is not possible and the
device may not be installed and taken into operation.
Check whether the enclosed materials, such as
gaskets, are suitable for your process conditions
(pressure, temperature, etc.).
The installation should only be performed under
supervision by a specialist and in compliance with
all applicable work safety rules.
Electrical connection
3.2
3.2.1 General information
Caution!
Read the installation instructions carefully to
avoid damage to the device.
Proceed step-by-step.
Only use the original plugs, cables and power
adapters (Fig. 1).
Never connect or disconnect plugs or cartridges
when the device is connected to the power
supply.
The device does not have an on/off switch; it
starts operation as soon as it is connected to
the power supply
.
Improper operation can result in damage to the
device.
Fig. 1: original cables and electrical accessories.
A
B
E
D
C