BlueVary UPDATING MANUAL
Rev 200504 002
13
EN
Caution!
During the programming procedure the
BlueVary
must not be disconnected from computer
or power supply. This can destroy the
BlueVary
.
The updating of the firmware will take less than 2 minutes. It is performed in two different steps.
First the old firmware will be erased. (Fig. 17)
Then the new firmware is uploaded. (Fig. 18)
Fig. 16: When message states the connection start programming can be clicked
Fig. 17: First step, old firmware is erased
Fig. 18: Second step, new firmware is uploaded
