4
IMPORTANT SAFETY INSTRUCTIONS
NOTICE
ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN IN
ACCORDANCE TO THE NATIONAL ELECTRIC CODE AND ALL LOCAL CODES
AND/OR ORDINANCES.
WHEN INSTALLING AND USING THIS ELECTRICAL EQUIPMENT, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.
READ AND FOLLOW ALL INSTRUCTIONS.
WARNING
1.
To reduce the risk of injury,
DO NOT
allow children to use this equipment.
2.
Connect
ONLY
to a grounding type receptacle that is protected by a ground fault circuit
interrupter (GFCI).
3. DO NOT
bury the cord or install the cord in an area where it will come in contact with lawn mowers,
trimmers, or any other equipment.
4. DO NOT CONNECT THIS EQUIPMENT TO AN EXTENSION CORD.
NOTE:
If the installer does
not abide by this warning, it will void the warranty.
5.
Replace damaged cords
IMMEDIATELY
.
DO NOT
use this equipment if the cord appears
damaged.
6.
Connect the ground wires to the grounding located in the motor.
7.
To reduce the risk of shock, a bonding connector is provided for bonding to any metal within 5 feet
of the swimming pool. All local points should be bonded with a
#8 AWG (8.4mm2)
wire.
NOTICE
THE CONSUMER IS REQUIRED TO GIVE THE INSTALLER AND/OR OPERATOR
THE INSTALLATION INSTRUCTIONS OF THIS MAXI-FORCE SWIMMING POOL
PUMP. THE MANUFACTURER’S WARRANTY WILL BE VOID IF THE PUMP IS
IMPROPERLY INSTALLED.
NOTICE
