-12-
Revision 6/F3503
©
Moffat Ltd, April 2005
E26 Convection Oven
FAULT
POSSIBLE CAUSE
REMEDY
NO HEAT
No power to thermostat.
(Refer fault diagnosis 6.1.7)
Thermostat faulty.
(Refer fault diagnosis 6.1.7)
Fan element faulty
(Refer fault diagnosis 6.1.10)
Identify fault and correct.
Replace.
(Refer service section 6.3.7)
Correct element fault.
(Refer Fault: Fan Element)
NO TEMPERATURE
CONTROL
Thermostat faulty.
(Refer fault diagnosis 6.1.8)
Replace.
(Refer service section 6.3.7)
SLOW RECOVERY
Overloading of oven.
Electrical supply incorrect.
Fan not working.
Thermostat calibration.
(Refer fault diagnosis 6.1.9)
Fan element not working.
Reduce oven loading.
Check supply voltage is as per
rating plate voltage.
Check fan operation.
Correct calibration.
(Refer service section 6.4.1,
6.4.2)
Correct element fault.
(Refer Fault: Fan element)
FAN ELEMENT NOT
WORKING
NO THERMOSTAT HEATING
INDICATOR LIGHT
Element faulty (blown).
(Refer fault diagnosis 6.1.10)
Indicator faulty.
(Refer fault diagnosis 6.1.11)
Replace.
(Refer service section 6.3.8)
Replace.
(Refer service section 6.3.3)
DOOR DOES NOT CLOSE
Tray in way of door.
Door seal obstruction.
Door hinges worn.
Door hinge counter brackets
worn.
Correctly position tray in rack.
Correctly install door seal.
(Refer service section 6.3.13)
Replace.
(Refer service section 6.3.15)
Replace.
(Refer service section 6.3.16)
DOOR SEAL LEAKS
Door seal damaged.
Door seal incorrectly fitted.
Replace.
(Refer service section 6.3.13)
Correctly install door seal.
(Refer service section 6.3.13)
