Blue Seal SD 5 EC BT2, Instructions For Use And Maintenance Manual

Page: 19 / 52

17
2.1.e.2 Draining water from tank for machines with drain
pump
The tank can be emptied by starting the manual drain
cycle during which only the drain pump keeps running.
IMPORTANT
The cycle can only be carried out by leaving the
machine ON with tank FULL of water and indifferent
whether door OPEN or CLOSED.
To perform MANUAL DRAINING, you must:
Remove the overflow (14)
Touch the SCROLL key
Select the DRAIN function from
the display
Touch the START key.
The START key turns BLUE
during the entire duration of
the cycle.
The DRAIN CYCLE starts for
the established amount of time.
The countdown of the cycle ap-
pears on the display in seconds.
At the end of the cycle, the ma-
chine switches off automatically
and the display reads OFF.
2.1.f SELF-WASHING (and DRAIN)
A SELF-WASHING (and DRAIN) cycle can be carried out
at the end of the day
IMPORTANT
The cycle can only be carried out by leaving the machi-
ne ON with tank FULL of water and the door CLOSED.
To perform the SELF-WASHING cycle, you must:
Touch the SCROLL key
Select the SELF-WASHING
function on the display.
Touch the START key.
The START key turns BLUE
during the entire duration of the
cycle.
The SELF-WASHING CYCLE
begins.
The countdown of the cycle ap-
pears on the display in seconds.
At the end of the SELF-WA-
SHING cycle, the machine will
have drained the water from
the tank.
At the end of the cycle, the ma-
chine switches off automatically
and the display reads OFF.
ATTENTION
Pressing the START key with the drain cycle in progress
temporarily interrupts the DRAIN cycle.
2.1.g TEMPERATURE reading
It is possible to view both the ACTUAL and SET tem-
perature in the boiler and in the tank for the selected
cycle with the machine ON .
Press the BACK key to display the temperature value.
The SET temperature value
of the water in the tank and
the water in the boiler appears
on the display.
Press the BACK key to
display the ACTUAL tempe-
rature value.
SET (example)
ACTUAL (example)
If no key is pressed, after about 5 sec, the SET tem-
peratures appear on the display.
MANUAL DRAIN CYCLE
ENGLISH
Part 2: Reserved for Operator