18
Gas Conversion and Specifications
Pilot Burners
1.
To remove the pilot burner, disconnect the gas
supply tube from the base of the pilot burner.
2.
Using a small screwdriver,withdraw injector from
inside the pilot burner.
3.
Determine the correct injector size for the
corresponding gas from the rating plate attached to
the inner bulkhead adjacent to the manifold test
point behind the front control panel.
4.
Fit the new pilot injector into the rear of the pilot
burner and push fully home.
5.
Re-connect the gas supply tube to the base of the
pilot burner and tighten.
Piezo Igniter
Pilot Burner
Thermocouple
Fig 17
Unscrew Gas
Supply Tube Here
Thermocouple/Pilot
Burner/Igniter
Retaining Plate
Fig 16
Screw Secured
Piezo HT Lead
Gas Supply Tube
Fig 15
Summary of Contents for Evolution G592
