34
Model BD306 Dual-Input Pump Controller Instruction Manual
7.7.1.
Setting the Input Signal (
inPut
)
Enter the
Input menu to set up the meter to display current (
m A
) or voltage (
UoLt
) inputs for
Channel A and Channel B.
The current input is capable of accepting any signal from 0 to 20 mA.
Select current input to accept 0-20 mA or 4-20 mA signals.
The voltage input is capable of accepting any signal from –10 to +10 VDC.
Select voltage input to accept 0-5, 105, 0-10, or ±10 VDC signals
Channel C is the Math Function calculation, which is set up in the Advanced Features menu.
7.7.2.
Setting the Decimal Point (
dEc Pt
)
The decimal point may be set with up to five decimal places or with no decimal point at all.
Pressing the Right arrow moves the decimal point one place to the right until no decimal point is
displayed, and then it moves to the leftmost position.
There are three decimal points to set up for three channels: Ch-A, Ch-B, and Ch-C.
After the decimal points are set up, the meter moves to the
Program menu.
Return to Table of Contents
