29
Model BD306 Dual-Input Pump Controller Instruction Manual
Display
Parameter
Action/Setting Description
on
On
Enable fail-safe operation
FLS 2
Fail-safe 2
Set relays 2-8 fail-safe operation
dELAy
Delay
Enter relay
Time Delay menu
dLy 1
Delay 1
Enter relay 1 time delay setup
On 1
On 1
Set relay 1 On time delay
OFF 1
Off 1
Set relay 1 Off time delay
dLy 2
Delay 2
Enter relays 2-8 time delay setup
brEAK
Loop Break
Set relay condition if loop break detected
iGnorE
Ignore
Ignore loop break condition (Processed
as a low signal condition)
On
On
Relay goes to alarm condition when loop
break detected
OfF
Off
Relay goes to non-alarm condition when
loop break detected
Aout
Analog Output
Enter the
Analog output scaling menu
diS 1
Display 1
Program display 1 value
Out 1
Output 1
Program output 1 value (e.g. e.000 mA)
diS 2
Display 2
Program display 2 value
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
PASS
Password
Enter the
Password menu
PASS 1
Password 1
Set or enter Password 1
PASS 2
Password 2
Set or enter Password 2
PASS 3
Password 3
Set or enter Password 3
unLoc
Unlocked
Program password to lock meter
Locd
Locked
Enter password to unlock meter
999999
-99999
Flashing
Over/under range condition
Return to Table of Contents