![background image](http://html1.mh-extra.com/html/blue-chip/axon-ngc-60/axon-ngc-60_user-manual_2775493011.webp)
presets of your AXON. Moreover it is possible to change the
parameter values in edit mode from your guitar. By using the
volume regulator of your guitar interface, you can control the
volume of a sound at your MIDI instrument.
How to connect your MIDI Equipment
Please connect the MIDI OUT of your AXON to the MIDI IN of
your MIDI instrument. For that purpose, use a 5 pin commercial
DIN cable/ MIDI cable. If you employ a sequencer program,
connect the MIDI OUT of your AXON to the MIDI IN of your
computer as well as the MIDI IN of your MIDI instrument to the
MIDI OUT of your computer.
How to mount an AXON in a 1 9 " rack
You can mount your AXON in a
19"
rack by using the optional
installation frame. In order to fix, use only the original screws. If
you prefer another form of mounting, remove first the rubber foot
from the bottom of the AXON. Please use only screws of the type
M3 to fix the
19"'
rack with the bottom of the AXON and take care
that the screws do not reach longer than 4 mm into the AXON.
Longer screws can damage the inside of the device.
Parameters
All parameters are printed above and below the middle LED line in
order to see immediately the current parameter. So you must not
keep figures in mind which belong to some parameters. The GLO-
BAL parameters are above, the SPLIT and HOLD parameters are
below the LED line.
Global Parameter
If you use your AXON for the first time you have to check the
settings of some global parameter in correspondence to your MIDI
instrument:
Please check the basic MIDI channel and tune your guitar with the
embedded tuning aid of your AXON. If you are in a hurry and if
you would like to play immediately with your AXON, read the
explanations in the sections BASIC CH and tuning of the guitar.
You must ensure that the connected MIDI instrument receives Pitch
Bend Range information, otherwise you set this value at your MIDI
instrument to 12. Then you leap over all further parameters and you
can test the factory presets.
In order to change one of the GLOBAL parameters switch your