=BLUE CHIP
USER MANUAL
AXON NGC60
GUITAR TO MIDI CONVERTER
STRING SPLIT
According to the split setting, either the upper two LEDs light
(SPLIT 2) or the lower two LEDs (SPLIT 1) light.
FRET SPLIT :
PICK SPLIT :
SPLIT OFF :
According to the split setting, either the middle two LEDs light
(SPLIT 1) or the right two LEDs (SPLIT 2) light.
According to the split setting, either the left LED (SPLIT 1)' or the
right LED (SPLIT 2) lights at the picking position.
All splits are turned off. All LEDs light.
By using the SELECT button you call up successively the following
edit or split possibilities:
The LEDs belonging to the split type light. Call up the desired
parameter with the +/- PARAMETER buttons for SPLIT 1 or SPLIT
2 and change each with the +/- VALUE keys. Play your guitar until
you find the setting that corresponds to your ideas.
SPLIT 1 :
SPLIT 2 :
SPLIT POINT :
The current splits belonging to the LEDs light alternately. At the
display SPLIT 1 and SPLIT 2 of a split type is shown which can
directly be changed with the +/- VALUE buttons. By pressing the
SELECT key again, you can leave this function. The last indicated
display value is now the new split point. The limit of the shown
value depends on the split type. The split point range for a guitar
with six strings is for example:
STRING SPLIT : This split type has a range from 1 to 6. 1 is the
high El string and 6 is the deep E6 string. Set for example the split
point to G3: SPLIT 1 goes now from El to G3 and SPLIT 2 goes
from G3 to E6.
FRET SPLIT : This split type has a range from 1 to 24. 1 is the first
fret after the nut and 24 is the fret at the base of the neck. Set for
example the split point at 15: SPLIT 1 goes now from 1 to 15 and
SPLIT 2 goes from 15 to 24.
PICK SPLIT : This split type has a range from 0 to 99. It goes from
the bridge to the neck and is therefore the usual picking position of
a guitar separated in 100 parts. Set for example the split point at 33:
SPLIT 1 goes now from 0 to 33 and SPLIT 2 goes from 33 to 99.
HOLD:
This function is only available if the GLOBAL parameter: HOLD
MODE is set to SEPARATE. Please read in the section Hold
parameter how to use and program the functions of the Hold pedal.
Otherwise leap over this function and press again the SELECT key.
AXON NGC60 -VERSION 1.01 20