continously to the base of the neck and you will see that the tones
become lower and lower.
Conclusively, the intensity of the MIDI controller depends on the
picking position.
Hold Parameter
While pressing the Hold pedal the Hold parameters will be
important if you set the GLOBAL parameter HOLD MODE to
SEPARATE. In this case your AXON offers you another possibility
to control your MIDI instrument.
Change the Hold parameter by switching your AXON in edit mode
(Press the +/- PARAMETER buttons at the same time until the LED
next to the expression EDIT lights.) Then press the SELECT button
several times until the LED next to the expression HOLD lights.
The first parameter LED blinks and the display shows the value of
the first parameter (PROGRAM). You change it with the +/-
VALUE keys or call up another parameter with the +/- PARAME-
TER buttons which can also be changed by the +/- VALUE keys.
The same control possibilities are available. See the section split
parameter.
In Hold mode the hold data are sent on an additional MIDI channel.
Since the meanings of the Hold parameters are identical to the
meanings of the SPLIT parameters, you can find a precise
description of each parameter in the section split parameter. You can
leave this function while pressing the SELECT button again in order
to edit perhaps again the split parameters. You can leave the edit
mode (EDIT) by pressing the +/- PARAMETER keys at the same
time. Naturally you can use the MODE and SELECT key here in
order to save your settings and to leave the edit mode. Please act in
the same way as in the section "How to store presets".
Data exchange through MIDI System Exclusive
Please read in the description of the GLOBAL parameters: SYSEX
SE or SYSEX RCV.