sends the Pitch Bend Range information after each program change
immediately again. This is necessary by most KORG synthesizers.
and probably by some other manufacturers. If your MIDI
instruments store Pitch Bend Range globally, just like the AXON
itself, this parameter should be OFF. If you are not familiar with
your MIDI instrument, you should set this parameter to ON. Then
your AXON will possibly give out some unnecessary MIDI data but
you will hardly notice it.
STRGMODE
String Mode : How to set COMMON or SEPARATE
COMMON Mode
In common mode all strings of your guitar are assigned to the basic
channel. In order to avoid conflicts with still sounding notes of the
same channel, no Pitch Bend information is sent in this mode if you
play more than one note. So a solistic play is possible although
restrictive. If your MIDI instrument can only receive at one MIDI
channel, you should use this mode.
In separate holdmode all data are given out at basic c1
while pressing the Hold Pedal.
SEPARATE Mode
Each string is assigned to an own MIDI channel:
El : Basic MIDI channel
B2 : Basic MIDI 1
G3 : Basic MIDI 2
D4 : Basic MIDI 3
A5 : Basic MIDI 4
E6 : Basic MIDI 5
The SEPARATE Holdmode is basic MIDI c 6. If your
MIDI instrument can receive data on several channels, you should
always use this mode. Restriction mentioned above in the
COMMON mode is not valid here. The split functions can only be
used in SEPARATE mode.
HOLD MODE
Hold mode (common/ separate/ sustain/ controller)
While pressing the Hold Pedal you can access four different
functions:" Common, separate, sustain and controller".
COMMON
While pressing the Hold Pedal, no other MIDI data are sent. A
previous chord will be kept frozen on your MIDI instrument as long