PAN SPREAD
Panorama spread (-15...+15)
By using the parameter PAN POS, you assign the stereo position for
all 6 strings. In order to avoid that all 6 strings are at the same stereo
position, you can use this parameter to spread the single strings
around the panorama position. Set the PAN POS value for example
to MID (to the MID position). Play on your guitar and vary the PAN
SPRD value.
Please consider that your MIDI instrument has to interpret
panorama information. For that purpose, read the user manual of
your MIDI instrument.
REVERB
Reverb portion of a sound (MIDI controller 91) : OFF/ 0.. 127
If your MIDI instrument is fitted with an embedded Reverb, this
parameter allows you to decide about the Reverb portion of your
used sound. This parameter must set to OFF, if your MIDI
instrument does not have an installed Reverb. Your AXON
won't
transfer this controller via MIDI. The Reverb portion of the optional
sound module will be controlled with this parameter, too.
VEL SENS
Velocity sensitivity (0...127)
You can restrict the dynamic response at your MIDI instrument by
reducing the value of this parameter. If the value is 0, all played
notes are given out of your AXON with the same velocity value
(with a velocity value of 64) , independently of your dynamics. You
get the greatest dynamic response at the value of 127.
VEL OFFSET
Velocity offset (-63...+63)
If the dynamics of your AXON is reduced by the Velocity
Sensitivity parameter, the generated velocity values could be too
high/ too low. This parameter allows you to increase/ decrease the
velocity value again.