manualshive.com logo in svg

Blue Bird TC/2000, Owner'S Manual

The Blue Bird TC/2000 Owner's Manual is your comprehensive guide to operating and maintaining this versatile bus model. Download the manual for free from our website and gain access to step-by-step instructions, safety protocols, and helpful tips to ensure optimal performance. Get your copy now at manualshive.com.

Share
Download
background image

108

Heaters ....................................................................... 35

Care & Cleaning of Defroster Fans ...................... 37
Control Panel .......................................................... 36
Defroster Fan Locations ......................................... 38
Defrosting ................................................................ 37
Driver / Passenger Comfort ................................. 38
Filter ......................................................................... 36
General Information ............................................... 35
Heater Access .......................................................... 36
Heater Bleeding Instructions ................................ 38
Heater Cut Off Valve Location ............................. 41
Heater Defroster Location ..................................... 38
Heater Hose Clamp Service .................................. 43
Heater Operation .................................................... 35
Heater Water Capacity Chart ................................ 44
Hose Repair ............................................................. 42
Outlet Locations ..................................................... 36
Preventive Maintenance ........................................ 42
Removal of Underseat Fan & Motor Assy. ......... 40

Hydraulic Brakes ..................................................... 74

Brake Warning System ........................................... 75
Dual Brake System ................................................. 75
Maintenance ............................................................ 75
Parking Brake .......................................................... 75

Hydraulic System Troubleshooting ..................... 78

Inspection .................................................................... 5

Daily Inspection ........................................................ 5
Prior to Placing New Bus in Service ...................... 5
Weekly Inspection .................................................... 6

Instrument Panel & Controls .................................. 8

Gauge Color Key ...................................................... 9
Instrument Panel w/Dual Scale Gauges ............... 8

Introduction ................................................................ 3

Jacking Instructions ................................................ 52

John Deere 8.1 CNG Engine Maint. Chart .......... 88

Keeping Your Vehicle Looking New ................... 33

Finish Damage ........................................................ 34
Floors & Floorcovering .......................................... 34
Foreign Material Deposits ..................................... 34
Polishing & Waxing Your Vehicle ........................ 33
Washing Your Vehicle ............................................ 33

Light Bulb Data ........................................................ 15

Exterior Lights ........................................................ 15
Interior Lights ......................................................... 15

Lower Side Panel Repair Procedure .................... 49

Maintenance Service Keys ..................................... 86

Manual Five Speed Transmission ........................ 69

Mirrors & Mirror Adjustment ............................... 19

Exterior Mirrors ...................................................... 20
Interior Mirrors ....................................................... 19
8" Dia. Supplemental Exterior Rearview ............ 20

Noise Emissions Warranty ..................................... 61

Operator's Compartment .......................................... 7

Quick Reference Maintenance Charts ............ 87-94

Rear Axle Vent .......................................................... 82

Reporting Safety Defects ......................................... 4

Seats & Seat Belts .................................................... 10

Driver's Seat ............................................................ 10
Driver's Seat Belt Operation ................................. 10
Driver's Seat Lubrication ....................................... 10
Passenger Seat Belt Operation .............................. 10
Seat Belt Inspection & Maintenance .................... 11
Seat Care & Cleaning ............................................. 11
Seat Cushion Service (DOT Seats) ....................... 11
Seat Cushion Service (DOT Seat Belt Seats) ....... 12
Seat Inspection & Maintenance ............................ 11
Track Mounted Seats .............................................. 12

Summary of Contents for TC/2000
















































































































Reviews:

No comments

Related manuals for TC/2000

GMC HUMMER EV 2022 Manual preview
HUMMER EV 2022
Brand: GMC Pages: 140
Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
Kia Sorento Owner'S Manual preview
Sorento
Brand: Kia Pages: 51
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
Subaru 1998 Forester Owner'S Manual preview
1998 Forester
Brand: Subaru Pages: 298
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3

Brands by name

Popular brands

Load more brands