12
BT-CMTS Series
Setup Guide
6.2 “Local-Provision IPv4 Address Pool Config” Tab (continued)
Section 7 - Configuring The CMTS
When within the control panel, the user may begin configuring the CMTS by setting up the following sections:
7.1 “US Channel” Panel
DHCP Address Pool Configuration
Address Pool: set the IP address of the starting IP for the range you want to offer (ex: 192.168.200.0 will give out IP
addresses 192.168.200.1 - 192.168.200.254)
Subnet Mask:
sets the Subnet range. 255.255.255.0 is Class C and will provide 254 IP addresses.
Default Route:
Default Gateway IP Address.
4
5
6
Device Configuration
Server Host MAC: non-editable field showing the MAC address of the GigE port of the CMTS.
Server Host IP:
IP address of the GigE port of the CMTS
TFTP Server Address:
IP Address of the TFTP server within the CMTS. Typically matches Server Host IP address.
7
8
9
Figure 6.2 - “Local-Provision IPv4 Address Pool Config” Tab
4
7
5
8
6
9
Figure 7.1 - “US Channel” Configuration Panel
2
3
