23 / EN
Washing Machine / User Manual
4.3.8.1 Auxiliary functions
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Rinse Plus
This function enables the product to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Shorter Wash
When this function is selected, the durations of the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption, high washing
performance is achieved in spite of the reduced duration.
• Remote Control
You can use this auxiliary function key to connect your product to smart devices. For detailed information, see
4.3.16 “HomeWhiz Function”.
• Programme Personalisation
This auxiliary function can only be used for Cotton and Synthetics programmes together with the HomeWhiz
application. When this auxiliary function is activated, you can add up to 4 auxiliary rinsing steps to the
programme. You can select and use some auxiliary functions even though they are not found on your product.
You can increase and decrease the time of the Cottons and Synthetics programmes within a safe range.
C
When the Programme Personalisation auxiliary function is selected, the washing performance and energy consumption will
be different than the declared value.
• Ant
This function is selected through the HomeWhiz application and programme follow-up light for the step turns
on. When the function is selected, the drum rotates for up to 8 hours for preventing the laundry from creasing
at the end of the programme. You can cancel the programme and take your laundry out at any time during
the 8-hour duration. Press the function selection key or the machine on/off key to cancel the function. The
programme follow-up light will remain on until the function is canceled or the step is complete. If the function
is not cancelled, it will be active in the subsequent washing cycles as well.
4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
• Machine Care
Press and hold the auxiliary function button 1 for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Operate the
programme while the machine is completely empty. To obtain better results, put powder lime-scale remover
for washing machines when the powder detergent function is selected. When the programme is over, leave the
loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is
load inside and aborts the programme.
