24 / EN
Washing Machine / User Manual
• Child lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if
the buttons are pressed five times consecutively.
To activate the Child Lock:
Press and hold Auxiliary Function button 2
for 3 seconds. After the countdown as
“CL 3-2-1"
on the
display is over, "CL On" symbol appears on the display. When this warning is displayed, you can release the
Auxiliary Function button 2
.
To deactivate the Child Lock:
Press and hold Auxiliary Function button 2
for 3 seconds. After the countdown as
“CL 3-2-1"
on the
display is over, "CL Off" symbol disappears.
• Wireless
You can use the wireless connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To activate wireless connection:
Press and hold Auxiliary Function button 4
for 3 seconds. Countdown
“3-2-1”
will be displayed,
and then “On” icon will appear on the display. Release
Auxiliary Function button 4 Release Auxiliary
Function
button. The Wireless icon will flash while the product is connecting to Internet. If connection is
successful, icon will remain on.
To deactivate wireless connection:
Press and hold Auxiliary Function button 4
for 3 seconds. Countdown
“3-2-1”
will be displayed, and
then “Off” icon will appear on the display.
C
First setup of the HomeWhiz application must be complete for the wireless connection to be activated. After setup, pressing
the auxiliary function button 4 will automatically activate the wireless connection.
4.3.9 End Time
Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and
minutes format.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water pressure, water hardness and
temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.
With the
End Time
function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time
button, the programme's estimated ending time is displayed. If the
End Time
is set,
End Time
indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press
Start/Pause
button after adjusting the time.
