Installation
10
Oven Assembly
CRUMB PANS
1. Install crumb pans under each end of the con-
veyor.
2. Slide the product stop over the outer edge of
the idle side crumb pan.
Figure 9
OPTIONAL REMOTE COMPUTER CONTROL
1. Drill the mounting holes for the cooking com-
puter support base.
2. Mount the support base and cable support
bracket to the wall.
3. Stack the cooking computer(s) on the support
base. Connect the cables at the rear of the
controller.
4. Secure the cables to the cable clamp support
bracket and to the rear of the oven using cable
clamps and screws.
NOTE: DO NOT overtighten the cable clamps.
Damage to the wires may occur caus-
ing the computer to fail.
Cable Clamp
Support Bracket
Cooking Computer
Support Base
Cooking Computer
Figure 10
