1
Charge on.
INPORTANT SAFETY INSTRUCTIONS
Before using the
Car Charging Group Inc.
electric vehicle supply equipment (EVSE) Blink Charger,
read all of these instructions, as well as the
WARNING
and
CAUTION
markings in this document, on
the Blink Charger, and on your electric vehicle (EV).
Consult the following symbols and related instructions for the actions necessary to avoid hazards.
Safety Instructions
Legend
WARNING:
Used when there is a risk of personal injury
WARNING:
RISK OF ELECTRIC SHOCK
– Used when there is a risk of electric shock
WARNING: RISK OF FIRE
– Used when there is a risk of fire
CAUTION:
Used when there is a risk of damage to the equipment
• A device employing pressure terminal connectors for field wiring connections shall be provided
with instructions specifying a range of values or a nominal value of tightening torque to be
applied to the clamping screws of the terminal connectors.
• This product should be installed only by a qualified approved technician.
• Make sure that the materials used and the installation procedures follow local building codes
and safety standards.
• The information provided in this manual in no way exempts the user of responsibility to follow
all applicable codes or safety standards.
• Car Charging Group Inc.
is not responsible for physical injury, damage to property or
equipment caused by the installation of this device.
• This document provides instructions for the Blink Charger and should not be used for any other
product. Before installation or use of this product, review this manual carefully and consult
with a licensed contractor, licensed electrician, or trained installation expert to make sure of
compliance with local building codes and safety standards.
Repair and Maintenance Clause:
• Only qualified approved electrician is allowed to repair or maintain this device. It is
forbidden for general user to repair or maintain it.
• Any repairment or maintenance MUST be done after powering off this device.
