27
Charge on.
4.3.4
IP Settings
Clicking on the “Configuration” and then “IP Settings” link will bring up the following
screen:
On this page you can set up the network connection. To finish, click the “Apply” button.
Operation Mode
Specifies if enable the Local Proxy function. Available options are Standalone,
Primary and Secondary. The Combo box will be disabled if your charge point
does not support this function. And Device Mode will be set as Standalone.
Standalone
Use charge point as a single device.
Primary
Use charge point as a primary charge point. Primary con-
nected to OCPP Server via 3G and connected to other charge
points (Called Secondary) via Wi-Fi and forms a local charge
points group. This group is also a WLAN (Wireless Local
Area Network).
Secondary
Use charge point as a Secondary charge point. Second-
ary connected to Primary via Wi-Fi. Secondary connected
to OCPP Server through Primary charge point (via 3G) and
Primary will dispatch incoming remote command to proper
Secondary charge points (or Primary itself).
Primary LAN IP
The IP of primary in LAN. This value cannot be modified by users.