G:\InDATA\manuals\OM-1607 E V1.02
November 19, 2012
Page 28
TORINO II Insert 1607
SERVICING cont.
GLASS DOOR REMOVAL
Removing the Glass Door
1. Remove outer shroud, see “INSTALLATION INSTRUCTIONS cont.” on page 14
2. Unhook the door latch.
3. Swing the door open.
4. Using a screw driver, remove the top glass retainer, making sure to hold the glass from falling out.
5. Lift out and remove door glass with the gasket attached.
6. If the glass door is damaged, it must be replaced with another glass door certified with this appliance
only.
7. Replacement glass doors are available through your Blaze King dealer, see “REPLACEMENT PARTS” on
page 35
Replacing the Glass Door
1. Check the condition of the glass and the gasket before installing door.
2. Replace the window glass and gasket and re-install the top glass retainer.
3. Swing the door shut and re-attached the door latch.
If the glass has been damaged contact your dealer and replace the glass and gasket with a new glass and
gasket provided by your dealer.
WARNING:
Do not operate appliance with the glass front removed,
cracked or broken. Replacement of the glass should
be done by a licensed or qualified service person.
WARNING:
• Do not use any substitute materials for glass components.
• Do not abuse glass door such as striking or slamming shut.
• Do not operate this appliance with cracked or broken glass.
• Clean glass with a soft, non-abrasive cloth and water or a suitable, mild, non-abrasive cleaner.
• Do not use abrasive cleaners.
• Do not clean or remove glass when the appliance is hot.
