Blaze King The Princess PI 1010A User Manual Download

Page: 4 / 36

PI-1010A

Page 4

DATE PRINTED: 4/7/11

Version 1.05

Safety Notice

IF THIS BLAZE KING STOVE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT.

TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS.

CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION

REQUIREMENTS IN YOUR AREA.

NOT APPROVED FOR MOBILE HOME INSTALLATION

THIS INSERT IS SUITABLE FOR INSTALLATION IN EITHER:

- A FACTORY BUILT FIREPLACE LISTED TO

UL 127

ULC S620

- A CODE-APPROVED MASONRY CHIMNEY WITH A FLUE LINER.

MANDATORY

in CANADA, Recommended in USA

PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR NEW ROOM HEATER. FAILURE

TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.

This unit is certified by the United States Environmental Protection Agency. Certified to comply with July, 1990
particulate emissions standards.

See pages 26 & 27 for Catalytic Combustor, Testing and Replacement.

CHIMNEYS: MASONRY FIREPLACE

In Canada:

A code approved masonry chimney with a 6” listed stainless steel flue liner system and the accompanying

vent connector is required.

In U.S.A.:

A code approved masonry chimney with appropriate vent connector extending from the flue collar of the stove

to the first chimney flue liner and adaptor plate. A full length listed flue liner system with vent connector is
recommended for all installations.

SAVE THESE INSTRUCTIONS

CAUTION:

HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP

CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY
CAUSE SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS
BEFORE OPERATING THE HEATER.

The following statement is required by the Environmental Protection Agency:

"This wood heater contains a catalytic combustor, which needs periodic inspection and

replacement for proper operation. It is against the law to operate this wood heater in a manner
inconsistent with operating instructions of this manual, or if the catalytic element is deactivated

or removed. DO NOT operate this insert without a properly operating catalytic combustor."'

Summary of Contents for The Princess PI 1010A





































Search results

Summary of Contents for The Princess PI 1010A

Reviews:

Related manuals for The Princess PI 1010A

Brands by name

Popular brands

Blaze King The Princess PI 1010A, User Manual

Search results

Summary of Contents for The Princess PI 1010A

Reviews:

Related manuals for The Princess PI 1010A

Brands by name

Popular brands