180.OM.CL26.FS.IPI E v1.02
September 6, 2017
Page 48
Clarity 26 FS IPI
TO BE DONE BY QUALIFIED PERSONNEL ONLY
1. Disconnect the gas, see gas valve shutoff , and electricity to the appliance.
2. Remove fan if installed.
3. Remove the bottom and rear wire shields (7 screws, 1 ground). (
Fig. 1
)
4. Undo the gas lines (one in, two out , and pilot).
5. Disconnect all electrical connections to valve including ground wire.
6. Remove the four screws holding the valve and valve bracket to the fi rebox bottom and remove valve.
(
Fig. 2
)
7. Installation is the reverse order of the previous steps.
NOTE: WHEN INSTALLING NEW VALVE, CHECK IF ANY UNUSED PORTS ARE PLUGGED.
CHECK OUTLET PRESSURE (3.8” W.C.) AND CHECK FOR LEAKS
VALVE REMOVAL AND INSTALLATION
Fig. 1
Fig. 1
Fig. 2
