180.OM.CL26.FS.IPI E v1.02
September 6, 2017
Page 21
Clarity 26 FS IPI
INSTALLATION
This section of the owner’s manual is for the use of qualifi ed
service technicians only. Fireplace placement, hearths, and
venting terminations will be covered, as well as the gas and
electrical systems. Please read “SAFETY PRECAUTIONS” at the
front of this manual.
INITIAL SETUP
1. Remove the top lid assembly from appliance and set it aside.
2. There are two door latch mechanisms on the top of the glass
door.(
Fig.1
) Pull the tabs forward and up off the door tabs.
3. Carefully slide the door glass assembly up and out of the
appliance(
Fig.2
).
NOTE: REMOVE THE STATIC CLING
LABEL THAT IS ON THE DOOR GLASS
. Hold glass to
frame when removing as it is only held in place with silicone.
Set the door aside.
4. Slide the safety screen up and out from appliance and set
aside.(
Fig.3
)
5. Remove packaged contents from fi rebox and unwrap,
HANDLE GLASS CAREFULLY BY THE EDGES, DO NOT
LEAVE FINGERPRINTS, CLEAN IF NECESSARY
. One
package contains the fl oor glass, the other contains the side
panels. Set glass panels aside in a safe place.
6. Remove fl oor plate assembly from appliance and set aside.
(
Fig.4
)
Fig.1
Fig.2
Fig.3
Fig.4
