180.OM.CL26.FS.IPI E v1.02
September 6, 2017
Page 22
Clarity 26 FS IPI
INSTALLATION cont.
7. Loosen the top left tab as shown(
Fig.5
).
NOTE: THE
SIDE WITH LABEL SHOULD BE FACING FIREBOX,
REMOVE BEFORE FIRING.
Rest left side panel on the
panel support, slide tab over panel, and retighten.
HANDLE
GLASS CAREFULLY BY THE EDGES, DO NOT LEAVE
FINGERPRINTS, CLEAN IF NECESSARY.
8. Repeat Step 7 for the right side panel.
9. Carefully place the fl oor plate assembly back into position
(
Fig.6
).
10. Place the fl oor glass on top of the fl oor plate assembly. (
Fig.7
)
NOTE: SMOOTH SIDE SHOULD FACE UP
.
11. If installing the optional log set(
Fig.8
) refer to installation
instructions on Page 39, if not continue below.
12. Repeat steps 1 to 4 in reverse order to complete initial setup.
Fig.5
Fig.6
Fig.7
Fig.8
