Anhang
Allgemeines Kurzanlei-
Touren
Zieleingabe
Zielspeicher Einstellun-
7
Theft protection system
It is possible to activate a coding for your TravelPilot DX-N so that the TravelPilot
DX-N cannot be operated after it has been disconnected from the battery (e.g. in the
event that it is stolen).
If the coding is active, it will be necessary to enter the code number before the unit
can be operated again after it has been disconnected from the battery. You will find
the code number in the TravelPilot DX-N equipment passport. Never keep this pass-
port in your vehicle!
For more information on activating/deactivating the coding and how to switch on cod-
ed equipment after it has been disconnected from the battery, please refer to the
section on “Settings”, “Activating/deactivating the safety code”.
Plus Point: This electronic theft protection system prevents unauthorised
persons from using the TravelPilot DX-N after it has been removed from the
vehicle.
Switching the TravelPilot DX-N off
For technical reasons, it is not possible to switch the TravelPilot DX-N off. If neces-
sary, you can switch off the TravelPilot DX-N display in the “Settings” menu.
1.
Use
on the remote control to mark “Settings” in the main
menu. Press
OK
.
The “Settings” menu will appear.
✔
2.
Select “Display” and press
OK
.
The “Display” menu will appear.
✔
3.
Mark “Off” and press
OK
.
The display will switch off.
✔
Press any one of the keys to reactive the display.
General Information
