60
Calibration settings
1.
Mark
on the top line of the “Settings” menu. Press
OK
.
The sub-menu for calibration will appear.
✔
Calibration after changing the tyres
When the car tyres are changed, from summer to winter tyres for example, it might be
necessary to calibrate the TravelPilot DX-N again.
1.
Select “Tyre change”. Press
OK
.
A warning note will appear.
✔
2.
If you want to calibrate the system, select “Continue” and press
OK
.
As soon as you begin driving, the TravelPilot DX-N will begin to update the
calibration information stored.
This process is displayed in a status window.
✔
Installing the system again
If the TravelPilot DX-N is installed in a different vehicle, the entire calibration process
must be performed again.
1.
Select “New installation”. Press
OK
.
A warning note will appear.
✔
2.
If you would like to perform a new installation for the system, select
“Continue” and press
OK
.
All of the calibration data will be deleted.
✔
3.
As soon as you begin driving, the TravelPilot will begin to calibrate the sys-
tem.
This process is displayed in a status window.
✔
System settings
