
Códigos de error computadora
Error de freno, compruebe los frenos/cableado de frenos. Retire la batería
durante 10 minutos y vuelva a intentarlo. Si no tiene éxito, llame al servicio.
Error del motor, retire la batería durante 10 minutos y vuelva a intentarlo. Si
no tiene éxito, llame al servicio.
Error del controlador, extraiga la batería durante 10 minutos y vuelva a
intentarlo. Si no tiene éxito, llame al servicio.
Indica que el modo de aceleración no funciona o está deshabilitado.
Nota: Throttlemode no está permitido en Alemania y otros países europeos,
por lo tanto, está desactivado. La activación no es posible con este modelo
(según la versión, el símbolo está permanentemente encendido o apagado,
ambos estados NO indican un error)
TORQUE
Tenga en cuenta la información sobre los componentes de la bicicleta en sí, algunas
partes tienen torque máximo admisibles impresos.
Apriete siempre los tornillos con la fuerza necesaria. Si no está seguro, haga que un
especialista/distribuidor de bicicletas compruebe los tornillos. Cuanto más pequeño es
un tornillo, más probable es que se dañe por fuerzas excesivas.
23_06_2021 Anleitung-E-Bikes.indd 44
23.06.2021 10:11:10
INFORMACI
Ó
N T
É
CNICA
Error codes computer model 2
Brake error, please check brakes/ brake wiring. Remove battery for 10 minutes
and try again. If no success, call service.
Motor error, please remove battery for 10 minutes and try again. If no success,
call service.
Controller error, please remove battery for 10 minutes and try again. If no
success, call service.
Indicates that throttle mode is not working or is disabled.
Note: Throttlemode is not permitted in Germany and other European
countries, it is therefore deactivated. Activation is not possible with this model
(depending on the version, the symbol is permanently on or off, both states
DO NOT indicate an error)
TORQUE
Please note the information on the bike components themselves, some parts have the
max. permissible Torques printed on.
Please always tighten the screws with the necessary feeling, if you are not sure, have the
screws checked by a specialist/ bicycle dealer. The smaller a screw is, the more likely it is
to be damaged by excessive forces.