9. BRAKE SYSTEM (MODEL-SPECIFIC)
Make sure how your brakes are working before you start driving.
Left Brake Lever: Front Brake
Right Brake Lever: Rear Brake
An additional coaster brake is available for models with hub gear. You apply this brake by pressing
the pedals against the normal pedaling movement.
On some models (e.g. the Foldable-E-Trike) the brakes can be locked to prevent it from rolling away.
To do this, apply the brake, press the button on the brake and while the button is still being pressed,
release the brake lever. The brake must be applied once before the journey, the button is now
released and the brake is released.
SAFETY NOTE:
Please note that the effectiveness of the brakes can vary in wet conditions or on slippery surfaces. Please
take into account the possibility oflonger braking distances and slippery surfaces when driving and
adapt your driving style accordingly (e.g. reduce speed, increase safety distances)!
Get new brake pads ready for ride:
Accelerate the bike to 25 km / h.
Brake in a controlled but powerful way to a standstill.
Repeat this about 10-20 times.
SAFETY NOTICE:
Please note that the brakes get hot if they are used frequently, touching them can cause
injury!
10. HANDLE BAR/ AHEAD STEM (MODEL-SPECIFIC)
Depending on the model, the handlebar still
must be mounted on the bike:
To do this, remove the cover screwed onto the
handlebar and put the handlebar on. The inner
stem must not protrude, leave approx. 2 mm
space here, otherwise the lid will no longer close
flush. Then tighten the two screws. Finally,
replace the cover.
For models with quick release(s) on the
handlebar, make sure that the quick release(s)
are securely closed to avoid twisting the
handlebar.
riding experience. Saddles can be adjusted in three ways: saddle height, forward/ backward position
EN
9. BRAKE SYSTEM (MODEL-SPECIFIC)
Make sure how your brakes are working before you start driving.
Left Brake Lever: Front Brake
Right Brake Lever: Rear Brake
An additional coaster brake is available for models with hub gear. You apply this brake by pressing
the pedals against the normal pedaling movement.
On some models (e.g. the Foldable-E-Trike) the brakes can be locked to prevent it from rolling away.
To do this, apply the brake, press the button on the brake and while the button is still being pressed,
release the brake lever. The brake must be applied once before the journey, the button is now
released and the brake is released.
SAFETY NOTE:
Please note that the effectiveness of the brakes can vary in wet conditions or on slippery surfaces. Please
take into account the possibility of longer braking distances and slippery surfaces when driving and
adapt your driving style accordingly (e.g. reduce speed, increase safety distances)!
Get new brake pads ready for ride:
Accelerate the bike to
.
Brake in a controlled but powerful way to a standstill.
Repeat this about 10-20 times.
SAFETY NOTICE:
Please note that the brakes get hot if they are used frequently, touching them can cause
injury!
10. HANDLE BAR/ AHEAD STEM (MODEL-SPECIFIC)
Depending on the model, the handlebar still
must be mounted on the bike:
To do this, remove the cover screwed onto the
handlebar and put the handlebar on. The inner
stem must not protrude, leave approx. 2 mm
space here, otherwise the lid will no longer close
flush. Then tighten the two screws. Finally,
replace the cover.
For models with quick release(s) on the
handlebar, make sure that the quick release(s)
are securely closed to avoid twisting the
handlebar.
23_06_2021 Anleitung-E-Bikes.indd 39
23.06.2021 10:11:10