Blaupunkt CR85 CHARGE, Owner'S Manual

Page: 8 / 120

6
minute/time format(12 or 24 hours)/calendar(year/month/day)snooze time( 5 min to 60 min).
Short press the set/memory button to finish the setting, and clock time will become stable on
display.
Alarm setting: press and hold the alarm1-2 on/off button until the hour digits flare on display;
and the alarm 1 icon LED will light on at same time. Press the +/- button to adjust the desired
hour; press and hold +/- button to accelerate setting at high speed. Short press the alarm1-2
on/off button again skip to the minute setting; press the +/- button to adjust the desired minute.
Short press the alarm1-2 on/off button again skip to the alarm source selection, press the +/-
button to select alarm source between buzz or radio(in case of you selected radio as alarm
source, press +/- button can select alarm volume between high and low level); press the alarm1-2
on/off button skip to wake up time selection between 1-5/6-7/1-1/1-7( “1-5” = wake up by
working day; “6-7” = wake up by weekend; “1-1” = wake up once; “1-7” = wake up by daily). Press
the alarm 1-2 on/off button again skip to alarm 2 setting which is same operation as alarm 1.
Alarm on/off: you need turn on the alarm after finished above alarm setting; press the alarm 1-2
on/off button repeatedly can turn on or off alarm 1 and alarm 2. Please make sure the relative
alarm icon LED will light on after you selected which means the alarm is working now.
Alarming and snooze: when unit is sounding due to the alarm time is being, press the alarm 1-2
on/off button to cancel the voice, and will wake up again at the same time of next day; if you
press the snooze button, the alarm will be silenced temporarily and come on again after the set
snooze duration.
Note:
1. The unit will exist the clock or alarm setting mode when no key pressed in approximate 10
seconds.
2.If your second alarm activate while the first alarm is sounding or it is in the snooze mode, the
second alarm overrides the first alarm (the first alarm will reset to come on the next day).
3. The alarm only works when the DC/AC power adaptor is connected. Please double check the
alarm setting in case of power interrupted.
4. The alarm voice duration time is 5 minutes in buzz source, 1 hour in radio source.
Radio
Before listen to the radio, please extend the wire antenna and move the unit next to the window
as you can in order to get better reception. Short press the radio button to turn on or off the radio
mode; press the volume button first, then continue to press the +/- button immediately for the
output volume adjustment.
Tuning and auto scan: short press the +/- button to tune the radio frequency per 0.1MHz; press
and hold the +/- button to scan and play the available station.
All-in-one scan(auto scan and save as preset station): long press the auto scan button(2 seconds)
to scan and save the available station automatically, max supported up to 20 preset stations.
Manual memory station: When you tuned a favorite station, press and hold the memory button
until the “PXX” flare on display, press the +/- button to select the preset station number you
desire to save, press the set button again to confirm. Then the radio station will be saved.
Pick up preset station: short press the memory button first, press the +/- button to select the
preset station number for listening.
Sleep: in radio listening mode, press and hold the sleep button first, and short press the sleep
button immediately to select the sleep time (05, 10, 15, 30, 45, 60, 75, 90 or OFF); the unit will
revert to clock interface after few seconds, press and hold the sleep button again can check the
remaining sleep time. And the radio listening will auto off when the sleep time is being.
Note: the radio station will have few impacts due to signal interference create by USB or wireless
charging output. You can turn down the volume, or switch to strong signal station for listening.