Blaupunkt CR85 CHARGE, Owner'S Manual

Page: 7 / 120

5
Wireless outdoor temperature transmitter installment
After you install batteries to the wireless outdoor transmitter, your clock radio will receive
outdoor temperature from it in few seconds. Then place your outdoor transmitter in a dry and
shaded outdoor area.
1-RF signal LED; 2- battery door; 3- Channel and selector; 4- battery compartment (2 x AAA, not
include); 5-holder;
Remark:
a. The enclosed outdoor transmitter only works when Channel 1 is selected.
b. Insert the holder to the bottom of the outdoor transmitter for desktop or insert it to the back of
the transmitter for wall mount purpose.
c. The temperature's readings will get stable and become more accurate after the unit powered
up for around 30 minutes.
d. Keep in mind that your outdoor sensor has a 60-meter open-air transmission with no
obstructions. Actual transmission range will vary depending on what is in the path of the signal.
Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in
half.
e. Press the in-out temperature button to switch the in-out temperature and month/day
information on display.
f. When the outdoor temperature loss, press and hold the out-temperature button (2 seconds),
can auto search and receive the wireless signal from outdoor temperature transmitter. If you
continue to lose the outdoor temperature, bring back the outdoor transmitter next to your clock
radio and reinstall the batteries of the transmitter again (replace with new alkaline batteries if
need). Try placing the transmitter in a different location until you have smooth transmission of
temperature data if need. Extreme cold weather (or low battery of the outdoor transmitter) could
result in intermittent or loss of transmission.
g. When appears on the upper right display, replace the batteries of your outdoor
transmitter with new ones.
Unit power on: insert the power connector into the DC jack of the unit, and plug in the AC/DC
adaptor to an AC household outlet in order to get the power.
Clock time setting: long press (2 seconds) the set/memory button, the hour digit will flicker on
the display, press the +/- button to adjust the desired hour, press and hold the +/- button to
accelerate setting at high speed; Short press the set/memory button again skip to the minute
setting. Using the same method like the hour setting to operate the rest setting for