Blaupunkt CR85 CHARGE, Owner'S Manual

Page: 11 / 120

9
Note:
1.This function only works with mobile devices that support Qi technology. Please make sure
your mobile device has included such feature.
2.Make sure your clock radio is connected with the adaptor (5V-2.5A) supplied with this clock
radio. Unauthorized chargers or adaptors may cause damage or the wireless charger may
malfunction.
3.If your mobile device is not charging, the charging indicator is off. Please verify that your
mobile device is not shifted too far off center.
4.Using the external wireless charging receiver connected to non-Qi compatible mobile device
may result in unstable charging.
5.Do not put any foreign object (metal) on the charging area any time or under the mobile
device during charging. The wireless charging indicator flashes and charging will stop.
6.Do not place a wireless charging receiver solely on the wireless charging surface. Doing so
may overheat the wireless charger and cause a fire. It may also result in serious burn or device
malfunction.
7.If you place a mobile device on the wireless charging surface for an extended period, the
wireless charger may overheat and stop charging.
8.Do not cover or block the heat release vent at the back of the clock radio.
9.When the mobile device is fully charged, remove it from the wireless charging surface.
10.Do not place foreign materials, such as metal objects, magnets, magnetic stripe cards,
paper clips etc. between the mobile device and the wireless charging surface. The mobile
device may not charge properly or may be damaged due to overheating.
11.Wireless charging may not work properly if you attach a thick case to your mobile device. If
your case is thick, remove it before placing your mobile device on the wireless charging
surface.
12.If you connect a charger to the mobile device during wireless charging, the wireless
charging feature will be unavailable.
USB charging: Connect the charging cable of your mobile phone to the A-type USB port at the
back of the unit, then connect the other end to your mobile phone. The clock radio will charge
the mobile phone automatically.
Note :
1.Make sure the original cable of your mobile phone's original charging cable for charging
2.Make sure the original adaptor (5V-2.5A) enclosed with your clock radio is being used to
power your clock radio. Using other adaptors may not charge your phone.
3.iPad and Notepad charging is not applicable.
4. Charging one mobile device by the USB port and another mobile device by the wireless
charger at the same time will reduce the charging efficiency and extend the charging time.
Trouble shooting
If your clock displays irrelevant time or does not function properly, which maybe caused by
electro-static discharge or other interference.
Unplug the DC jack at the back of the unit, slide
open the battery cover and take out the batteries. Then re-plug the DC jack and reinstall
batteries by observing the c/- polarity. Your unit will be reset to default settings and
you need to set it again.