Blaupunkt Bremen CD72 Operating Instructions Manual Download

Page: 15 / 49

➮

Press the softkey

assigned to

the “NAVI” display item to adjust
the volume for navigation systems.

➮

Set the required volume using the
volume control

➮

Press the joystick OK

to save

your settings or the MENU button

to close the menu without sav-

ing.

Note:

●

You can also adjust the volume
during the voice output using the
volume control

. This setting ap-

plies to the current voice output
and is not saved.

ADJUSTING THE VOLUME

Sound (bass, treble and
X-BASS)

You can adjust the bass, treble and X-
BASS individually for each audio
source.

Adjusting the bass

➮

Press the AUDIO button

“AUDIO 1” appears in the display.

➮

Press the softkey

assigned to

the “BASS” display item.

➮

Move the joystick

up/right to

boost the bass or move it down/left
to reduce the bass.

When you have finished making your
changes,

➮

press the joystick OK

or the

AUDIO button

The settings are saved.

Adjusting the treble

➮

Press the AUDIO button

“AUDIO 1” appears in the display.

➮

Press the softkey

assigned to

the “TREB” display item.

➮

Move the joystick

up/right to

boost the treble or move it down/
left to reduce the treble.

When you have finished making your
changes,

➮

press the joystick OK

or the

AUDIO button

The settings are saved.

SOUND

Summary of Contents for Bremen CD72


















































Search results

Summary of Contents for Bremen CD72

Reviews:

Related manuals for Bremen CD72

Brands by name

Popular brands

Blaupunkt Bremen CD72, Operating Instructions Manual

Search results

Summary of Contents for Bremen CD72

Reviews:

Related manuals for Bremen CD72

Brands by name

Popular brands