background image

76

Traffic information

Your unit is equipped with an RDS-EON
receiver. EON (Enhanced  Other  Net-
work) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Every time a traffic announcement (TA)
is transmitted, you will automatically be
switched from a station that does not
provide traffic information to a station
within the broadcasting network that
does.
Once the traffic report has been played,
you will be switched back to the pro-
gramme that you were listening to be-
fore.

Switching traffic information
priority on/off

Press the TUNER button 

<

 in ra-

dio mode.

The radio functions menu appears in the
display.

Press the softkey 

4

 assigned to

the “TRAF” display item.

Traffic announcement priority is active
when a traffic jam symbol is shown in
the display.

Note:

The TA menu is displayed during a
traffic announcement.

To interrupt the current traffic announce-
ment,

press the softkey 

4

 assigned to

the “OFF” display item.

If you want to deactivate priority for traf-
fic announcements,

press the softkey 

4

 assigned to

the “TRAF” display item.

Note:
You will hear a warning sound:

if you leave the reception area of a
traffic information station that you
are currently listening to.

if, while listening to a CD or cas-
sette (depending on the version of
the car radio), you leave the broad-
casting area of a traffic information
station that you are tuned into and
the subsequent automatic search
cannot find a new traffic informa-
tion station.

if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.

If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.

Setting the volume for traffic
announcements

Press the MENU button 

8

.

Press the softkey 

4

 assigned to

the “VOL” display item.

Press the softkey 

4

 assigned to

the “TRAF” display item.

Set the required volume using the
volume control 

1

.

Press the joystick OK 

7

 or the

MENU button 

8

 to close the

menu.

TRAFFIC INFORMATION

Summary of Contents for Bremen CD72


















































Reviews: