Blaupunkt Bremen CD72 Operating Instructions Manual Download

Page: 43 / 49

Setting the stage effect

You can activate a stage effect that
“repositions” the music in front of the
driver and/or front passenger. This gives
you the impression you are standing
right in front of a stage.

➮

Press the DSA button

➮

Press the softkey

assigned to

the “STGE” display item.

➮

Press the softkey

assigned to

the “LEFT” display item for a stage
effect for the driver.

➮

Press the softkey

assigned to

the “RIGHT” display item for a
stage effect for the front passenger.

➮

Press the softkey

assigned to

the “FRNT” display item for a stage
effect for the driver and front pas-
senger.

➮

Press the joystick OK

or the

DSA button

to close the menu.

The settings are saved.

Selecting sound effects

You can choose between different
sound effects for your music:

●

CATHEDRAL (CATH)

●

THEATRE (THEA)

●

CONCERT HALL (CONC)

●

CLUB

●

STADIUM (STAD)

These sound effects have already been
programmed.

➮

Press the DSA button

➮

Press the softkey

assigned to

the “EFCT” display item.

➮

Press the softkey

assigned to

the display item of the sound effect
that you want to use.

If you do not want to use any sound ef-
fects,

➮

press the softkey

assigned to

the “OFF” display item.

➮

Press the joystick OK

or the

DSA button

to close the menu.

The settings are saved.

DSA - EQUALIZER

Summary of Contents for Bremen CD72


















































Search results

Summary of Contents for Bremen CD72

Reviews:

Related manuals for Bremen CD72

Brands by name

Popular brands

Blaupunkt Bremen CD72, Operating Instructions Manual

Search results

Summary of Contents for Bremen CD72

Reviews:

Related manuals for Bremen CD72

Brands by name

Popular brands