3) After you finish the installation in process 1 and 2, connect the N line (N) to the N terminal of the limiter and tighten
the line.
4) Connect the control line. There are two numbers 1 and 2 on the interface of SUN limiter, and the same on the water-
proof terminal of the inverter. Twist the waterproof terminal and connect the red line to number 1 and black line
to number 2 shown as the picture. After that connect the terminal to the interface of the SUN limiter. The other side
of the line should be connected to the control terminal.
Hymon
Fotowoltaika Sp z o.o.
ul. Dojazd 16A 33-100 Tarnów
Wyłączny dystrybutor nowoczesnych systemów
www.
hymon
.pl
22
Pic 7.5 Waterproof terminal
Pic 7.6 Connect limiter to inverter
1
2
limiter
+ -
1
2
Pic 7.3 Clamp Senor
L
K
Pic 7.4 Clamp Senor internal arrow
Load