Blaupunkt ASPEN IVDM-7003, Operating Instructions Manual

Page: 66 / 85

66
Speaker setup (Chicago IVDM-7003)
The Chicago IVDM-7003 can be set according to the playback
frequency ranges of the connected speakers. Before performing
the settings, check which speakers (except for the subwoofer)
can produce low frequencies.
Select the setting “LARGE” if the connected speaker can
produce low frequencies.
Select the setting “SMALL” if the connected speaker cannot
produce low frequencies.
Select the setting “NONE” or “NO” if no speaker is connected.
1. Touch the
Setup
Setup
button on the touch screen menu and
then touch the button.
2. Touch the button.
✔
The “Speaker Setup” AUDIO submenu is displayed.
EXIT
EXIT
NEXT NEXT
FRONT
FRONT
REAR
REAR
CENTER
CENTER
SUB WOOFER SUB WOOFER
SMALL LARGE LARGE
SMALL NONE LARGE LARGE
SMALL NONE NONE LARGE
Speaker Setup
Speaker Setup
NO YES YES
3. Select “FRONT” (front speaker), “REAR” (rear speaker),
“CENTER” (center speaker) or “SUB WOOFER” by
touching it.
4. Perform the setting by touching the desired speaker
setting.
Note: The settings for the front speaker do not feature
the entry “NONE” since all vehicles are equipped with
front speakers.
5. To confirm the setting, touch the
EXIT EXIT
button.
6. Repeat steps 3 - 5 to perform additional settings, or
6. touch the
EXIT
EXIT
button to exit the menu.
Note: The audio signals for non-connected speakers
(setting “NONE” or “NO”) are added to the audio
signals of the connected speakers.
In the process, the audio signal of the center speaker
is evenly distributed to the left and right front speaker.
The audio signals of the rear speakers are added to
the front speakers.
The subwoofer signal is not distributed since the other
signals already contain bass.
AUDIO setup menu
BA IVDM-7003 Teil 3 GB 03.02.2006, 8:34 Uhr 66